S 600 Coupe (140.076) V12-6.0L (120.980) (1995)
5. Pull plunger (2) out of outside disc carrier (1).
NOTE: Check O-ring between outside disc carrier and plunger guide ring for leaks. To do this, fill the plunger guide ring with a little kerosene or
benzine. Then observe whether the fluid leaks out. In the event of leaks, replace the outside disc carrier.
Installation Note
Check sealing rings (12, 13) for wear or damage and replace if necessary. Insert sealing rings (12, 13) ensuring that the rings are not twisted and that
they point downwards (in direction of arrow).
Place inserter on outside disc carrier (1). Lubricate inserter, (021) and sealing rings (12, 13) with ATF and then carefully insert plunger (2) into
outside disc carrier. Press down plunger without tilting, while rotating plunger gently.