S 600 Coupe (140.076) V12-6.0L (120.982) (1997)
Right engine mount: dipstick guide tube:
Unbolt at cylinder head cover and at oil pan, bolt on.
Installation note
O-ring, note: replace according to condition.
Bolts (6):
Unscrew from above with suitable wrench, tighten (55 Nm).
Engine mount (3) with shield (4):
Remove downward, install (stop 9).
Installation notes
The rotation lock (arrow) in the engine mount (3) must engage in the opening in the shield (4) and in the retaining groove in the engine carrier.
Shields (4) on left and right are identical.
Pay attention to environmental protection regulations when disposing of engine mounts. Dispose of engine mounts with mixed scrap.
TIGHTENING TORQUES IN NM
SPECIAL TOOL