mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Remove/Install Evaporator|Page 7193 > < Remove/Install Evaporator|Page 7191
Page 3
background image

4

Remove charcoal canister (if fitted). To do this, remove cover (27, 5 screws), evacuate pneumatic gasket with tester and pull charcoal canister up
and Out

 

5

If a charcoal canister is not installed, there is a damping mat in its place. Remove damping mat.

 

6

Remove defroster outlet nozzles (6 clips and 2 screws on right-hand outlet, 8 dips on left-hand outlet), then unscrew 2 screws (26) on each.

 

Remove/Install Evaporator|Page 7193 > < Remove/Install Evaporator|Page 7191