mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

ABOUT US
AR35.30-P-0660A Remove/Install Inside CV Joint or Rubber Boots on Rear Axle Shaft|Page 4705 > < AR35.30-P-0660A Remove/Install Inside CV Joint or Rubber Boots on Rear Axle Shaft|Page 4703

S 600 Coupe (140.076) V12-6.0L (120.982) (1997)

Page 2
background image

1. Position hub perpendicular to ball cage and insert

2. Insert one ball, observing the markings on the joint hub and ball cage
3. Insert hub with ball cage and ball into joint race, again observing the markings (arrow)

NOTE:  If the parts are not marked, install the joint race so that the narrow side of the ball track always faces the wide side of the hub or vice
versa (arrows)

4. Tilt out hub with ball cage enough so that one ball after another can be inserted

Outer

AR35.30-P-0660A Remove/Install Inside CV Joint or Rubber Boots on Rear Axle Shaft|Page 4705 > < AR35.30-P-0660A Remove/Install Inside CV Joint or Rubber Boots on Rear Axle Shaft|Page 4703