S 600 Sedan (140.057) V12-6.0L (120.982) (1996)
Seat Cover: Service and Repair
Remove/Install Cover on Driver's Seat Backrest
Preliminary work:
Driver's backrest removed. Refer to "Replacement of Driver's Seat Backrest". See: Seat Back/Service and Repair
Driver's seat backrest
place on a suitable base.
Screws (arrows)
screw out.
Rear panel of backrest (1)
remove.
Cloth apron
unhook and remove.
Adjusting wheel (3) and lower surround (4)
detach. Observe installation note!
Panelling (5)
remove.
Panelling (6)
remove and pull out lead (7) on panelling (6).
Cover (8)
detach all round.
Additional lower cloth loosening
remove from the plug-in fold.
Transverse loosening device (9)
detach at the top and remove.
Backrest frame (10)
remove from rubberized hair support (16).
Plastic hooks (13) on transverse and longitudinal loosening device
unhook.
Lateral nettle strips
detach.
Plastic ring (14) on inner head restraint eye (15)
separate and remove.
Head restaint eyes (15)
remove.
Cover (8)
remove from rubberized hair mat (16).
Reinstall
in reverse order.