S 600 Sedan (140.057) V12-6.0L (120.982) (1996)
/v12-6.0l_(120.982)/Page-635005.png)
Installation Note
Replace O-rings. Install bottom oil line (6) first.
12
Swing air conditioning compressor with connected pipe group outward to the front.
13
Remove bolts and screws (12, 13 and 14). Remove oil filter housing upward.
Installation Note
Install oil filter housing (1) with dowel sleeve (15) and align to dimension "A" (5 mm) between timing case cover (24) and oil filter housing (1) so
that the power steering pump holder can be installed. Tightening torque 25 Nm.
14
Clean sealing surfaces.
15
Replace profile rubber gasket.
16
Install in the reverse order.
17
Run engine, check for leaks.
Note
The oil circulates in the air/oil cooler when the thermostat valve in the oil filter housing opens. See function of oil filter (18-1000).
18
Check engine oil level, adjust to correct level.
SPECIAL TOOLS
