S 600 Sedan (140.057) V12-6.0L (120.982) (1996)
10
Screw in spindle (06) until a firm resistance is felt.
When screwing in, ensure that the pins of the riveted link can be inserted into the hole of the plate.
11
Turn over thrust piece (D5) to the riveting side (arrow), (Fig. E).
12
Position riveting tool exactly over the middle of the pin (arrow), (Fig. F).
13
Tighten spindle (06).
Torque at spindle 30 - 35 Nm (reference value).
14
Rivet pins of the riveted link individually.
15
inspect riveting (arrows), re-rivet if necessary.
SPECIAL TOOLS