S 600 Sedan (140.057) V12-6.0L (120.982) (1996)
/v12-6.0l_(120.982)/Page-668005.png)
Install exhaust camshaft sprocket (5) with timing chain fitted, pay attention to colored marking and to tightening torque.
5
Right guide rail (4): rotate right intake camshaft (8) in direction of rotation of camshaft with wrench (25) 104 589 01 01 00. Slacken timing chain.
6
Pull fight guide rail (4) off bearing pin, remove.
Installation Note
Fit timing chain onto intake camshaft sprocket (12) (pay attention to colored marking), tension and install guide rail (4).
7
Left guide rail (6): rotate left intake camshaft (9) in direction of rotation of camshaft with wrench (25) 104 589 01 01 00. Slacken timing chain.
8
Pull left guide rail (6) off bearing pin (6a).
Installation Note
Fit timing chain onto intake camshaft sprocket (13) and exhaust camshaft sprocket (3) (pay attention to colored markings), install guide rail (6).
Rotate exhaust and intake camshafts in opposite direction of rotation of camshaft with wrench (25) 104 589 01 01 00. Tension timing chain.
TIGHTENING TORQUES IN NM
