S 600 Sedan (140.057) V12-6.0L (120.982) (1996)
/v12-6.0l_(120.982)/Page-2759007.png)
Before clipping in the control cable (3), "close" the rear compartment nozzle and pull the front control cable (8) all the way to the rear. Press the control
cable (3) into the sheet metal clips (11) in this position and secure the control cable sleeve with plastic clips (10).
Removal, Installation
1
Screw out screws (arrows) on control unit. Disconnect plug connector (2 each), remove control unit.
2
Remove insert (2), screw out screw (4).
3
Unhook control cable (3) for rear compartment nozzle (arrows).
