mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Procedures|Page 6589 > < Suspension - Spring Compressor Tool|Page 6586
Page 1
background image

Suspension Spring ( Coil / Leaf ): Procedures

AR32.20-P-0200-01A Clamping and unclamping front and rear springs

- except CODE (P98) Black Series [model 209]

Danger!
Risk of injury caused by pinching or crushing when working on springs or spring bodies that are under load

Use only approved tensioning devices; shield off hazard area if necessary. Inspect special tools for damage and proper operation (visual
inspection). Wear protective gloves.

Special Tools

Model-specific assignment of tensioning device/clamping plates:

Front spring tensioning device
Model 171, 203, 209 ..............................................................................................................................................................................  203 589 01 31 00

Front spring tensioning device
Model 129, 140, 170, 202, 208, 210 ......................................................................................................................................................  202 589 01 31 00

Front spring clamping plates
Model 171, 203, 209 ..............................................................................................................................................................................  203 589 01 63 00
Model 171 ..............................................................................................................................................................................................  171 589 03 63 00

Front spring clamping plates
Models 129, 170, 202, 203, 208, 209, 210 ............................................................................................................................................  202 589 13 63 00

Front spring clamping plates
Model 140 ..............................................................................................................................................................................................  202 589 14 63 00

Rear spring tensioning device
Model 129, 140, 170, 202, 203, 208, 209, 210, 171 ..............................................................................................................................  202 589 02 31 00

Rear spring clamping plates model
140 up to 12.94

Rear spring clamping plates model
140 as of 01.95

Rear spring clamping plates
Models 129, 170, 202, 203, 208, 209, 210 ............................................................................................................................................  202 589 13 63 00

Procedures|Page 6589 > < Suspension - Spring Compressor Tool|Page 6586