S 600 Sedan (140.057) V12-6.0L (120.982) (1996)
/v12-6.0l_(120.982)/Page-2015014.png)
Note:
Do not overheat paint while applying heat.
15.
The fender lip is reworked over the entire area (A, Figure 28) in several stages. A plastic hammer must be used to avoid damaging the paint.
16.
Install new wheel/tire combination.
! WARNING!
Only the M12 x 1.5 x 40 mm spherical wheel bolts supplied with the rims are to be used.
17.
Evenly tighten wheel bolts to 110 Nm.
! WARNING!
AMG light alloy wheel bolts must be retightened after 60 - 300 miles (100 - 500 km). Tightening torque: 110 Nm.
Parts Information
Model 129
Group: 40
Number: 334
Date: February 1995
Work Instructions
SUBJECT:
MODEL 129
INSTALLATION OF AMG LIGHT ALLOY ACCESSORY WHEELS
