mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Trunk / Liftgate Motor|Service and Repair|Page 8258 > < Trunk / Liftgate Lock Cylinder|Service and Repair
Page 1
background image

Trunk / Liftgate Motor: Service and Repair

AN88.50-P-0002-02N Retrofitting Trunk Lid Remote Control Wiring Harness

1. Insert brown fuse holder (2) with 25 ampere fuse in plug location 25 on fuse carrier on rear SAM control unit (N10/8).

2. Remove black, 32-pin connector (3) from rear SAM control module (N10/8) and open.
3. Install gray/blue lead (4) for remote trunk locking wiring harness in chamber 5 of black, 32-pin connector (3).
4. Close black, 32-pin connector (3) and connect to rear SAM control module (N10/8).

5. Route wiring harness (20) from passenger compartment to lead passage for rear wall in trunk along present leads and fasten with cable strap.

6. Route lead (long tie-out) to PSE control unit (combined) (A37) and fasten above tank reservoir.

Trunk / Liftgate Motor|Service and Repair|Page 8258 > < Trunk / Liftgate Lock Cylinder|Service and Repair