mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

GF82.20-P-4101-02I Overhead Control Panel Control Unit, Purpose|Page 9087 > < Driver/Vehicle Information Display|Locations
Page 1
background image

Driver/Vehicle Information Display: Description and Operation
GF82.20-P-4101-02I Overhead Control Panel Control Unit, Purpose

GF82.20-P-4101-02I Overhead Control Panel Control Unit, Purpose

Measuring in-car temperature, purpose

The inside sensor blower in the overhead control panel control unit (N70) is actuated upon request of the automatic air conditioning control and
operating unit via the CAN interior. First perform diagnosis on sensor blower.

The overhead control panel control unit (N70) then returns the status and the measured interior temperature to the automatic air conditioning control and
operating unit via the CAN interior.

The overhead control panel control unit (N70) then returns the status and the measured interior temperature to the automatic air conditioning control and
operating unit via the CAN interior.

Comfort closing, purpose

If comfort closing is activated by pressing the air recirculation button or the activated charcoal filter button 1.5 s, a signal is sent to the overhead control
panel control unit (N70) via the CAN interior, whereupon the position of the tilting/sliding roof (SR) (M12) is stored and, if the tilting/sliding roof is
open (SHD) (M12), it is closed automatically.

If the button is pressed again for 1.5 seconds, the tilting/sliding roof (SR) (M12) returns to the previously saved position.

GF82.20-P-4101-02I Overhead Control Panel Control Unit, Purpose|Page 9087 > < Driver/Vehicle Information Display|Locations