mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Lighting - Headlamp/Fog Lamp Aim Too High or Low|Page 9468 > < AR82.10-P-0004I Remove/Install Front Axle Level Sensors|Page 9459
Page 1
background image

Headlamp Adjusting Screw: All Technical Service Bulletins
Lighting - Headlamp/Fog Lamp Aim Too High or Low

Date: April 26, 2006

Order No.: P-B-82.10/504

Supersedes:

Group: 82

SUBJECT: 
Model 220.067/170/174/175/176/179/183/184, as of Model Year 2003

Headlamp Low Beam or Fog Lamp Is Always Either Too High or Too Low

If you receive customer reports in the above model vehicles that the headlamp low beam or fog lamp is always either too high or too low
regardless of how the headlamp is adjusted, the mechanical connector between the low beam and fog lamp may be disconnected. It is not
necessary to replace the headlamp unit. Perform the following to resolve.

1.

Adjust fog lamp using vertical adjusting screw (Figure 1).

Lighting - Headlamp/Fog Lamp Aim Too High or Low|Page 9468 > < AR82.10-P-0004I Remove/Install Front Axle Level Sensors|Page 9459