S 65 AMG (220.179) V12-6.0L Turbo (275.981) (2006)
/v12-6.0l_turbo_(275.981)/Page-935002.png)
2.
Navigate through following screen menus in DAS to recode instrument cluster: Control units/Information and communication/ICM - Instrument
cluster with maintenance interval display/Control unit adaptations/Variant coding/Bus system - Telematic.
3.
Set "Information and communication" to "Present" by pressing F3 to change setting.
4.
Press F5 to transfer to control unit; press F3 to confirm transfer to control unit.
5.
Press F2 after coding has been carried out.
6.
Disconnect SDS.
Note:
^
The following allowable labor operation should be used when submitting a warranty claim for this repair:
Warranty Information
