mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Procedures|Page 14473 > < Procedures|Page 14471
Page 3
background image

7. Remove plug (18) from trunk lid (6).

The plug (18) is no longer required.

8. Guide black 4-pin connector (19) and line (20) of reversing camera (B84/3) from outside into cutout in trunk lid (6) and clip reversing camera

(B84/3) into trunk lid (6) as shown in picture.
Later, connect the black 4-pin connector (19) in the trunk lid (6) to the reversing camera wiring harness.

AN54.65-P-0030-03SX Retrofit Backup Camera Wiring Harness

AN54.65-P-0030-03SX Retrofit Backup Camera Wiring Harness

Component Identification

Procedures|Page 14473 > < Procedures|Page 14471