S 65 AMG (221.179) V12-6.0L Turbo (275.982) (2008)
/v12-6.0l_turbo_(275.982)/Page-2898014.png)
37. Secure reversing camera wiring harness (1) to on-board wiring harness.
38. Unlock lock (arrow) on side of on-board COMAND coupling housing (29) and remove black 20-pin contact carrier (28) from COMAND coupling
housing (29).
39. Install transparent line (tr) of reversing camera wiring harness (1) in contact cavity 7 of black 20-pin contact carrier (28).
40. Install screened line (sc) of reversing camera wiring harness (1) in contact cavity 17 of black 20-pin contact carrier (28).
The screened line (sc) is thicker than the transparent line (tr).
41. Install black 20-pin contact carrier (28) in COMAND coupling housing (29).
AN54.65-P-0030-06SY Retrofit Reversing Camera Power Supply Module
AN54.65-P-0030-06SY Retrofit Reversing Camera Power Supply Module
1. Clip reversing camera power supply module (N66/10) into existing holes (arrow) in body.
The couplings (2) on the reversing camera power supply module (N66/10) must point downward.
AN54.65-P-0030SX Retrofit Backup Camera
AN54.65-P-0030SX Retrofit Backup Camera
-
MODEL 221.0## / 1## 1A up to 122603
-
MODEL 221.0## / 1## 1A as of 122604 up to 154194
