S 65 AMG (221.179) V12-6.0L Turbo (275.982) (2008)
Component Identification
30
Detach insulation (34c) from the glove compartment (34a) in area where the hole (34b) is to be drilled.
Insulation (34c) will be fixed in place again later on.
31
Drill a hole (34b) with a diameter of 32 mm in glove compartment (34a) as per the dimensions.
32
Guide branch-off line (7b) of rental vehicle wiring harness through the hole drilled in the glove compartment (34a) and seal with grommet (6).
33
Fix insulation (34c) again on glove compartment (34a).
34
Position branch-off line (7b) of rental vehicle wiring harness in the glove compartment (34a) as per picture.