S 65 AMG (221.179) V12-6.0L Turbo (275.982) (2008)
/v12-6.0l_turbo_(275.982)/Page-3635002.png)
6. Drill hole with dia. (A) at position defined by front mud guards (1) in underbody paneling and fasten front mud guards (1) to underbody paneling
with expansion rivets (6).
Ensure that no other components are damaged when drilling hole with dia. (A).
A= 6.5 mm
7. Remove entire protective foil (3) from adhesive strips on front mud guards (1) and uniformly press adhesive strips against front fender
8. Protect inner front fender edge against corrosion in area of clips on front mud guards (1) with wax preservation agent.
