mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

P-54_65_194B > < Computer/Controls - DAS/XD Add-Ons Software Update|Page 198
Page 1
background image

Parking Assist Control Module: All Technical Service Bulletins
Parking Assist - System Unavailable After TCM Update

Date: April 29, 2009

Order No.: P-B-54.65/217

Supersedes:

Group: 54

SUBJECT:
Model 221.171/176/177/179/186, Modification Year 807, 808 or 809 Equipped
with SA code 230 (Advanced Parking Guidance)

"Parking Guidance Unavailable" Displayed in Instrument Cluster

If you receive customer reports in the above model vehicles of "Parking Guidance unavailable" message in the instrument cluster after the transmission
software was updated, this may be caused by the new transmission control software submitting the information "no power in transmission position D".
The information is received by the radar sensor control unit (SGR); however it cannot be processed and therefore deactivates the Parking Guidance.
Associated fault code may be 7474 - CAN signal "target gear" from control unit Electronic transmission control is implausible.

To resolve, flash radar sensor control unit (SGR) with SDS version 02/2009 or later.

Note:

The following allowable labor operations should be used when submitting a warranty claim for this repair. This information has been generated on April
29, 2009. Please refer to Netstar --> Star TekInfo --> Star Time for the most current labor time allowance.

In Case of Warranty, use the table above.

P-54_65_194B > < Computer/Controls - DAS/XD Add-Ons Software Update|Page 198