S 65 AMG (221.179) V12-6.0L Turbo (275.982) (2008)
Electronic driveline inclinometer
1
Press the STEP button. "Inclination angle" "Measurement' is selected.
Selection menu screen
Selection menu screen
Measurement - Angle 1
2
Press STEP button while main menu is displayed. "Measurement' is selected.
Main menu screen
Main menu screen
The vehicle must be on its wheels for the measurement.
The measurement of all angles (four angles on vehicles with 2-piece propeller shaft and five for vehicles with 3-piece propeller shaft) should be
conducted without any interruption. An angle that has already been measured can be measured a second time if required. To do this, with the
Measurement menu displayed, press the STEP button repeatedly until the display indicates Ready to measure the relevant angle.
3
Unclip electrical lines and electrical connectors (G3/3x1, G3/4x1, G3/5x1, G3/6x1) of 02 sensors from bracket (31).
4
Detach bracket (31) and heat shield (32) from transmission.
Component Identification
5
Clean transmission bore and surroundings (arrow).