S 65 AMG (221.179) V12-6.0L Turbo (275.982) (2008)
Component Identification
Soft stop
The function includes soft start-up and delay of the rear roller blind in a defined area in front of the mechanical stop.
Operating keys and switches
The rear roller blind can be operated via the following control points:
^
In the front central operating unit with the:
-
freely programmable button
-
turn/push control (A40/9s11)
^
In the left rear switch group with the:
-
Rear roller blind switch (S21/21s4)
^
In the right rear door switch group with the:
-
Rear roller blind switch (S21/22s4)
Function requirements
^
C. 15R On
^
Rear roller blind normalize
Illustration of individual operating possibilities:
Control via freely programmable button
When the freely programmable button is actuated, the upper control panel control panel transmits a signal via the interior CAN to adjust the rear roller
blind. The rear SAM control unit receives the request and actuates the rear roller blind motor according to the current position of the rear roller blind.