SL 500 (129.067) V8-5.0L (119.982) (1996)
NOTE:
Position lateral seams for center brace as well as front lateral seam approx. 3 mm on edge on top frame (figure at bottom left).
Top covering .............................................................................................................................................................. glue laterally onto top frame at front
NOTE:
Glue top covering on without air inclusions in bead on top frame (arrows).
Soft top ........................................................................................................................................................................................ move to vertical position
Covering strips ...................................................................................................................................................................... glue onto inside of top frame
Soft top ...................................................................................................................................................................................................... lock completely
Screw (9) on corner brace ...................................................................................................................................................................................... screw in
Covering strips (12) on braces and top frame .......................................................................................................................................................... glue on
NOTE:
The front brace must be located in the correct position in relation to the lateral guide arm.
Position: brace-guide arm
Rubber strap (18) ................................................... pull out of top covering to third hole, glue onto cloth holding rail (B-pillar) and screw in screw (19)
Rubber strap ............................................................................................................................................................................................... cut off at corner
Sealing cord, part no. 005 989 12 7110 .................................................................................................................................................... press on (arrow)