SL 500 (129.067) V8-5.0L (119.982) (1996)
/v8-5.0l_(119.982)/Page-2616009.png)
Top covering ............................................................................................................................................................ glue onto cloth holding rail (B-pillar)
NOTE:
Glue on covering strip (20) under tension so that the border makes contact with the rail (21, arrow) without a gap.
Top covering ............................................................................................................................................................. cut off at comer of cloth holding rail
Top covering .......................................................................................................................................................... cut out in area of screw heads (arrows)
Screws ................................................................................................................................................................ screw out (arrows, figure at bottom right)
NOTE:
Center screw serves for fastening the cloth holding rail and should no longer be screwed out.
