SL 500 (129.067) V8-5.0L (119.982) (1996)
Seat Bottom Frame: Testing and Inspection
Checking Front Seat Frame Following Accident
Side covering on backrest frame removed. See: Seat Cover/Service and Repair/Procedures
Front seat backrest
unlock and tilt forward.
Check gauge
position on backrest strut.
Contour of backrest strut
check.
Clearance
>= 1.5 mm replace seat frame. Observe note!
Cover above cable duct on belt buckle side of seat frame
remove.
Covering above seat frame
remove.
Steel right angle
position on reinforcement rib on seat frame.
Clearance
>= 1.0 mm replace seat frame. Observe note!
Backrest lock
check manually and electrically.
Backrest play at top of backrest strut
check or measure, nominal value <= 18 mm.
Function of automatic locking system
check.
Adjustment gear
check for easy motion and noise, replace adjustment gear on complaint.
Drive motors
check current consumption.