SL 500 (129.067) V8-5.0L (119.982) (1996)
General function
check.
NOTE: If clearance >= 1.5 mm is present between the check gauge and backrest strut or >= 1.0 mm between the steel right angle and reinforcement rib
on the seat frame, replace the seat frame together with the seat rails and adjustment gears.
Special tools
Commercially available tools
Steel right angle (flat), no. 38001 des. no. 030
e.g.Hahn & Koib GmbH & CO.
Werkzeugmaschinen und
Werkzeuge
Postfach 333, Konigstrasse 14
7000 Stuttgart 1
Tel. 0711/20040
Telex 723 060-20/21 hk d
Multimeter
e.g.Fluke 23 DB
Sun, DMM-5
Thorn Emi Arometer 2003
Checking
1
Position check gauge on backrest strut and check contour.