mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Vacuum/Pressure Pump Switch, Seats > < Roll Bar Control Switch|Description and Operation|Page 9316
Page 1
background image

Roll Bar Position Switch: Service and Repair

Occasional seats or baggage shelf removed. 

See: Seats/Service and Repair/Procedures 
See: Interior Moulding / Trim/Service and Repair 

Side covering rear left removed. 

Removal

Clips (arrows) on cable duct

press off

Cable duct (illustrated on right side)

open and remove cables

Cable duct

remove

Plug connector

disconnect at limit switch (arrow)

Limit switch (S83/1)

screw out with open end wrench (24 mm) (observe position of plug connection)

Installation

Install in opposite order

Vacuum/Pressure Pump Switch, Seats > < Roll Bar Control Switch|Description and Operation|Page 9316