SL 500 (129.067) V8-5.0L (119.982) (1996)
Coolant Reservoir: Service and Repair
Replacing Overflow Reservoir
Removal and Installation
-
Drive car onto lift platform or over inspection pit.
-
Detach overflow line (6) of overflow reservoir (1), install.
-
Unscrew nuts (2) from below, screw on.
-
Take off overflow reservoir (1) downward, install.
NOTE: When removing overflow reservoir (1), protective cap (3) of air admission connection (5) remains next to splash water reservoir (4).
-
Protective cap (3) must be refitted when installing