SL 500 (129.067) V8-5.0L (119.982) (1996)
6. Insert clamping sleeve (18)
7. Attach puller tool No. 201 589 06 33 00, or equivalent, so that the thrust piece (012b) on the closed side and the unflared side of the clamping
sleeve point towards the housing (012a) (arrow)
-
Clamp in a vise and press together as far as they will go
NOTE: The clamping sleeve is flared during the tightening process
8. Check that rubber mount and clamping sleeve are perfectly seated against the contact surfaces