mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

GF82.95-P-0001-01R TELE AID, Location Of Components|Page 18786 > < GF82.95-P-0001-01R TELE AID, Location Of Components|Page 18784
Page 16
background image

Component Identification

Component Identification

TELE AID switch-on characteristics emergency call

The TELE AID emergency call system is switched on by turning the transmitter key (A8/1) in the EIS control unit (N73) to position 1 or 2. The
switch-on procedure is indicated by the indicator lamp flashing for 4 sec. in the SOS pushbutton switch (S93/3). Moreover, the telephone
transmitter/receiver unit and TELE AID, D2B (A35/17) waits for a ready confirmation from the restraint system control unit (N2/7). The system is
operational as soon as the ready confirmation is received. If the system is not authorized an error message appears in the instrument cluster (A1) and the
system is not operational.

TELE AID switch-on characteristics telediagnosis

The TELE AID telediagnosis system is always ready for operation, even if the transmitter key (A8/1) in the EIS control unit (N73) is in the 0 position,
and the telediagnosis pushbutton switch on the telephone handset (A34) of the telephone interface (A34/4) has been pressed for long enough. The
telephone must be switched on (stand-by mode) and the TELE AID telediagnosis system must be authorized.
If the system is not authorized an error message appears in the instrument cluster (A1) and the system is not operational.

TELE AID switch-off characteristics emergency call

The TELE AID emergency call facility is switched off when the transmitter key (A8/1) in the EIS control unit (N73) is turned to position 0, no
emergency call is active and the telephone interface (A34/4) is not set to shut-off delay.
The telephone system can be set to power-down in order to continue a telephone conversation for a certain time in spite of " Circuit 15R: OFF".
For control of the telephone system TELE AID remains also active during the telephone shut-off delay, however, it is not possible to trigger an
emergency call .

During a call TELE AID is only then switched off when the emergency call is terminated.

^

If an authorization is in progress while switching off, the authorization is interrupted and TELE AID switched off.

TELE AID switch-off characteristics telediagnosis

When the telephone is switched off TELE AID telediagnosis is deactivated.

GF82.95-P-0001-01R TELE AID, Location Of Components|Page 18786 > < GF82.95-P-0001-01R TELE AID, Location Of Components|Page 18784