SL 550 (230.471) V8-5.5L (273.965) (2008)
Control Arm Bushing: Service and Repair
AR33.15-P-0170-02I Insertion/Extraction of the Rubber Bushing on the Track Control Arm
AR33.15-P-0170-02I Insertion/extraction of the rubber bushing on the track control arm
Rubber mount on spring control arm with thrust plates
- except CODE (979) Special protection version [models 211/230]
- except CODE (Z07) Top protection [models 211/230]
- except CODE (P99) Special model "AMG Black Series" [model 230]
Special Tools
Component Identification
Model 215 and model 220 with thrust plates, model 230
1
Pull thrust plate (1) off rubber mount (17d) using puller (2).
Installation: Ensure that the thrust plate (1) and bush of rubber mount (17d) form a level surface or are flush after pressing on the thrust plate
(1)(arrow).
Model 215, 220: In the case of repair the rubber mount (17d) (without thrust plates (1)) is replaced by a rubber mount (17d) (with thrust plates
(1)).