mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Cockpit Management and Data System (Comand), Function|Page 18471 > < Cockpit Management and Data System (Comand), Function|Page 18469
Page 19
background image

Component Identification

The following are integrated in the COMAND operating, display and control module (A40/3):

^

Graphical LCD color display

^

Navigation processor with GPS receiver and gyrosensor

^

CD drive for alternatively playing Audio CDs and loading navigation data

^

Traffic data recorder

^

Dual-tuner radio

^

Audio amplifier

GF82.85-P-3114-07RJ Operating, Display Unit With Control Unit, Design

GF82.85-P-3114-07RJ Operating, Display Unit With Control Unit, Design

- with CODE (498) Japan version

Component Identification

The following systems and components are integrated into the COMAND operating, display and controller unit (A40/3):

^

Graphic compatible color liquid crystal display (LCD)

^

Digital versatile disk (DVD) ROM drive for playing navigation DVDs and audio CDs

^

FM-multiplex tuner (for processing traffic information)

^

TV tuner

^

Navigation processor

The COMAND operating, display and controller unit (A40/3) is also equipped with an "AUX jack" in the glove compartment, which can be used as a
connection option for additional audio sources such as, e.g. an MP3 player.

The following interfaces are available in the COMAND operating, display and controller unit (A40/3):

^

Controller Area Network bus, class B (interior) (CAN-B)

^

Digital data bus (D2B)

^

Serial interface for portable CTEL (A34/6)

GF82.85-P-3114-08RA Operating, Display and Control Module, Function

GF82.85-P-3114-08RA Operating, Display And Control Module, Function

- with CODE (352) COMAND operating and display 
- except CODE (491) USA version
- except CODE (498) Japan version

Processing buttons pressed

The control buttons and switches on the function keypad on the COMAND operating, display and control module (A40/3) are read in via the
microcontroller I/O ports and transferred to the central processor. Depending on the system function the button actuations are processed in the central
processor or transmitted to the system components via the bus system (Digital Data Bus (D2B), CAN-B or RB-CAN) in the form of a data telegram.

Cockpit Management and Data System (Comand), Function|Page 18471 > < Cockpit Management and Data System (Comand), Function|Page 18469