mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Tele Aid Block Diagram|Page 18989 > < Tele Aid Block Diagram|Page 18987
Page 5
background image

The TELE AID telediagnosis systems is always ready for operation, even when the key in the starter switch is in the 0 position and the telediagnosis
pushbutton on the telephone handset is actuated correspondingly. The telephone should be switched on (stand-by mode) and the TELE AID telediagnosis
system should be authorized. If the system is not authorized an error message appears in the instrument cluster and the system is not ready for operation.

TELE AID switch-off characteristics emergency call

-

The TELE AID emergency call is switched off when the key in the EIS control module (N73) is turned to position 0, no emergency call is active
and the telephone is not set to shut-off delay.

NOTE:  The telephone system can be set to shut-off delay so that it is possible to to continue a call for a certain time even when circuit 15R: 
OFF.
-

For control of the telephone system TELE AID remains also active during the telephone shut-off delay, however, it is not possible to trigger an
emergency call.

-

During a call TELE AID is only then switched off when the emergency call is terminated.

-

If an authorization is in progress while switching off, the authorization is interrupted and TELE AID switched off.

TELE AID switch-off characteristics telediagnosis

When the telephone is switched off TELE AID telediagnosis is deactivated.

Authorization, Function

Authorization, Function

Error Message In Instrument Cluster (A1)

Authorizing TELE AID emergency call

With the authorization the service provider (Tegaron company) authorizes to actuate an TELE AID emergency call. The authorization is vehicle and not
person-related.

Authorization is required in the following cases:

-

When the system is initially started up.

-

With a new SIM card (Subscribe Identification Module) for TELE AID

-

When the vehicle owner changes

-

After expiration of a period of 6 months following last authorization (this procedure is accomplished automatically in the background).

During authorization a check is accomplished via mobile telephone:

-

The validity of the SIM card (for TELE AID) installed in the telephone transmitter/receiver and TELE AID, D2B (A35/17).

Tele Aid Block Diagram|Page 18989 > < Tele Aid Block Diagram|Page 18987