mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

TV Tuner, Location/Task/Design|Page 19205 > < TV Tuner, Location/Task/Design|Page 19203
Page 9
background image

- with CODE (863) Digital/analog TV tuner

Component Identification

Location

The TV combination tuner is located on a bracket in the trunk on the right sidewall behind the paneling.

Task

The TV combination tuner has the following tasks:

^

Reading in analog and digital TV signals

^

Evaluating input factors

^

Output of output values

^

Exchange of control commands and transfer of audio signals (PCM format) and data for the auxiliary TV services (e.g. videotext, DVB-T-data
services)

Reading in analog and digital TV signals

The input values are read in over the following discrete lines:

-

Power supply via circuit 31 and circuit 30g over one direct line each

-

Electronic wake-up for Media Oriented System Transport (MOST) via one direct line

-

Analog and digital TV signals over a coaxial line by TV antennas 1 to 4 via the left antenna amplifier module (A2/64) and the right antenna
amplifier module (A2/65)

Evaluation of input factors

The amplified TV signals are evaluated internally and separated into video and audio signals.

Output of output values

The output values are output over the following discrete lines:

-

Control/power supply antenna amplifier

-

Y/C line (video output)

-

Left and right analog audio

Exchange of control commands and transfer of audio signals PCM format) and data for the auxiliary TV services (e.g. videotext, DVB-T-data
services)
MOST signals

The TV combination tuner is a subscriber of the MOST. It communicates the following signals or data to the COMAND operating, display and
controller unit:

TV Tuner, Location/Task/Design|Page 19205 > < TV Tuner, Location/Task/Design|Page 19203