mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Customer Interest: > < Brakes - Noises When Releasing Brake Pedal|Page 12419
Page 3
background image

13)

Insert the SBC mounting bracket into the rubber body mounts.

14)

Connect the SBC electrical connector.

15)

Install the electrical cable straps onto the SBC bracket.

16)

Connect the SBC hydraulic lines to the retaining mounts.

17)

Connect the vent tube from the cooling system's expansion tank.

18)

Connect the engine's right side air inlet tube.

19)

Unlock the vehicle and connect Star Diagnosis.

20)

Using Star Diagnosis clear DTCs.

21)

Check coolant level, and refill if necessary. Refer to WIS document AH20.00-P-1142-01V

Parts Information

In Case of Warranty

Customer Interest: > < Brakes - Noises When Releasing Brake Pedal|Page 12419