mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Campaign - SBC Suction Hose Inspection/Replacement|Page 13071 > < Campaign - SBC Suction Hose Inspection/Replacement|Page 13069
Page 7
background image

^

Connect the unmarked end of the suction hose (C, Figure 7) onto the suction line (A, Figure 8) located underneath the SBC hydraulic unit and
secure hose with a new hose clamp (arrow, Figure 8).

Note:

Ensure that the new suction hose is not kinked and is not under tension.

^

Connect end of the new SBC suction hose marked "HU" (Figure 9) onto the SBC hydraulic unit fitting (B, Figure 10) and secure with a
new hose clamp (arrow).

Campaign - SBC Suction Hose Inspection/Replacement|Page 13071 > < Campaign - SBC Suction Hose Inspection/Replacement|Page 13069