SL 55 AMG (230.474) V8-5.5L SC (113.992) (2003)
3.
Assemble in reverse order.
4.
Proceed to SUBJECT I.
I.
ALL MODELS - INSTALL ENGINE CONTROL UNIT SOFTWARE
1.
Connect Star Diagnosis.
2.
Check software version of DAS.
^
Ensure to use DAS version 10/2005 or later.
^
Model 199: Ensure to have patch 2006-05-04-0561 installed.
^
Connect battery charger to ensure vehicle power is> 12.5 volts.
^
Ensure to follow DAS steps exactly as described.
3.
Install engine control unit software; follow the following DAS path: "Control units/Drive/ME - SFI2.8 Motor electronics 2.8/ Control unit
adaptation/Control unit programming/Hard disk".
CAUTION!
If SDS is disconnected during the programming, the control unit will not be operational and will need to be reprogrammed.
4.
Code control unit:
^
Model year 2003-2006 vehicles: Select "Variant coding/SCN Coding" and follow on-screen steps to perform SCN coding; refer to latest
versions of S-B-58.00/144 for Online SCN coding or S-B-07.61/38 for Office SCN coding.
^
Model year 2002 vehicles: Select "Control unit adaptations/Version coding/Read coding and change if necessary" to code the control unit.
5.
Erase event codes and fault memory; disconnect Star Diagnosis.