mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

ABOUT US
AR41.10-P-0100R Remove/Install Propeller Shaft Intermediate Bearing and Replacing Deep-Groove Ball Bearing|Page 11448 > < AR41.10-P-0100R Remove/Install Propeller Shaft Intermediate Bearing and Replacing Deep-Groove Ball Bearing|Page 11446

SL 55 AMG (230.474) V8-5.5L SC (113.992) (2003)

Page 1
background image

Center Support: Service and Repair
AR41.10-P-0100-7I Pulling Off Rubber Mount With Grooved Ball Bearing

AR41.10-P-0100-7I Pulling off rubber mount with grooved ball bearing

Special Tools

Component Identification

1

Position puller with pulling arms (see magnified section).

2

Pull rubber mount (7b) together with grooved ball bearing off the joint fork.

Shown on linkage arm in model 220

AR41.10-P-0100R Remove/Install Propeller Shaft Intermediate Bearing and Replacing Deep-Groove Ball Bearing|Page 11448 > < AR41.10-P-0100R Remove/Install Propeller Shaft Intermediate Bearing and Replacing Deep-Groove Ball Bearing|Page 11446