SL 55 AMG (230.474) V8-5.5L SC (113.992) (2003)
AR41.10-P-0050-05I Connect sections of propeller shaft Long-life grease (NLGI grade 2)
1
Coat splined profile with Molykote(R) grease.
2
Connect sections of propeller shaft.
The humps on the front propeller shaft must be between the two humps on the linkage arm (arrows). Ensure correct seat of rubber sleeve at large
diameter.
Shown on model 220
AR41.10-P-0050-09I Release Guide Sleeves on Hardy Couplings
AR41.10-P-0050-091 Release guide sleeves on Hardy couplings
Drift for loosening fitted sleeves in flexible couplings.
Propeller shaft installed
Models 215, 220, 230 without vibration damper at rear
1
Loosen the fit sleeves of the flexible couplings using the drift (shop-made tool) on the three or four arm flange of the transmission or rear axle
center assembly.
Model 220.028/128 with vibration damper at rear