SL 600 (129.076) V12-6.0L (120.981) (1995)
Roll Bar Position Switch: Service and Repair
Occasional seats or baggage shelf removed.
See: Seats/Service and Repair/Procedures
See: Interior Moulding / Trim/Service and Repair
Side covering rear left removed.
Removal
Clips (arrows) on cable duct
press off
Cable duct (illustrated on right side)
open and remove cables
Cable duct
remove
Plug connector
disconnect at limit switch (arrow)
Limit switch (S83/1)
screw out with open end wrench (24 mm) (observe position of plug connection)
Installation
Install in opposite order