SL 600 (129.076) V12-6.0L (120.981) (1995)
/v12-6.0l_(120.981)/Page-2290005.png)
17.
Adjust driving lamps by turning Phillips head screws.
18.
Warm AMG logo and mounting surface to 40 °C using heat gun. Apply logo according to Figure 10.
Optional procedure - Transferring chrome moldings from original bumper cover to AMG air dam/bumper cover assembly
^
Trial fit moldings before painting bumper cover. Lip needs to be removed in area of molding.
^
Drill holes in AMG part according to production bumper cover.
^
Paint bumper without moldings, then install moldings and clips on left and right side.
^
Modify reinforcement beam in area of clips.
B. Side Skirts For Sedan (Model 124)
Preparation
1.
Remove side panels (A and B, Figure 11) by carefully levering with plastic wedge (110 589 03 59 00) and tugging gently to disengage panels from
clips.
