SL 600 (129.076) V12-6.0L (120.981) (1995)
/v12-6.0l_(120.981)/Page-965001.png)
Manifold Pressure/Vacuum Sensor: Description and Operation
Figure 4
PURPOSE AND LOCATION
The pressure sensor (connection 4 in image), located in the EZL/AKR control module (N1/4 and N1/5), detects the intake manifold pressure. This
signal is sent from the EZL/AKR control modules to the LH control modules via the controller area network (CAN).
This information is used for the following:
^
Engine start-up to about 600 RPM
^
"Limp home mode" when air mass sensor is defective
