SL 600 (129.076) V12-6.0L (120.981) (1995)
Test Equipment Hook-up
PREPARATION FOR TEST
1. Connect socket box to left LH control module (N3/2) or right LH control module (N3/3).
2. Unplug 2-pole connectors on fuel injection valves.
3. Remove fuel rail with fuel injection valves. Do not disconnect the fuel feed and return lines.
4. Connect self-made harness (048) one after another to each injection valve.
5. Hold each injection valve one after another in measuring glass.
NOTE: The numbers in parentheses in the "Test Connection" column, for example (1.23), signify:
1 =
Connector 1 on wiring diagram,
23 = Socket 23 on wiring diagram.
Test Steps FIV 1.0 - 1.1