SL 600 (129.076) V12-6.0L (120.981) (1995)
/v12-6.0l_(120.981)/Page-1244002.png)
Fill torque converter hall full with ATF oil. Insert flushing mandrel (63) and drive at low speed for approx. 2 minutes using a hand drill. Then
drain ATF oil through a clean cloth via the drain plug and allow the oil to drip through.
If after this there is metal swarf in the cloth, the torque converter must be replaced.
Screw oil cooler with oil cooler lines (49) onto the injector (064) and flush out with ATF oil ensuring that the transmission oil flows freely. Then
blow out oil cooler with oil cooler lines with compressed air.
