SL 600 (129.076) V12-6.0L (120.983) (1997)
Removal, installation
1
Screw off center catch (77-320), mark position with felt tip pen, (do not disconnect hydraulic lines).
2
Cut lining in top compartment in area of retainer nut with knife (arrow, right). After removal glue lining back on.
3
Press center catch away slightly and screw off nuts (arrow, left).
4
Install in opposite order.
5
Check for proper function and leakage.
77-385 Renewing Solenoid Valves
77-385 Renewing Solenoid Valves