SL 600 (129.076) V12-6.0L (120.983) (1997)
/v12-6.0l_(120.983)/Page-2628001.png)
Roll Bar Control Module: Service and Repair
Removal
Ignition
switch off
Negative pole on battery (observe note)
disconnect and cover
Right occasional (rear) seat
remove. See: Seats/Service and Repair/Procedures
Connectors on control module
disconnect
3 nuts on control module
unscrew
Control module
remove
NOTE: It is necessary to disconnect the battery because the soft top control module is active for approx. 60 minutes after the ignition has been
switched off.
Reinstall in opposite order.
Check function See: Roll Bar/Testing and Inspection
