SL 600 (129.076) V12-6.0L (120.983) (1997)
/v12-6.0l_(120.983)/Page-2639001.png)
Roll Bar Hydraulic Valve Block: Service and Repair
Remove/Install Valve Block
Preliminary jobs:
Remove coupe roof (operating instructions).
Remove baggage shelf. See: Interior Moulding / Trim/Service and Repair
Remove coverings in rear.
Remove occasional (rear) seats. See: Seats/Service and Repair/Procedures
Observe safety regulations. See: Service Precautions/Technician Safety Information
A.
Roll bar valve block (A57)
Plug connectors (a, b)
disconnect.
Hydraulic lines (c, d, e, f, g, h)
remove on valve block.
NOTE: Hydraulic line no. 101 (d) is under pressure.
When the hydraulic line is disconnected cover connection with rag.
Screw plugs onto hydraulic lines and into connections on valve block immediately.
Special tool
Hydraulic line c:
Plug no.
129 589 00 91 08
Plug no.
129 589 00 91 09
Hydraulic lines d, e, f, g, h:
