SL 600 (129.076) V12-6.0L (120.983) (1997)
/v12-6.0l_(120.983)/Page-2644011.png)
Soft top ........................................................................................................................................................................................ move to vertical position
Rail (7) and seal ..................................................................................................................................................................... install on top side of soft top
Velcro strip (8) .................. close, correct, if required, because no sagging points should be present in this area on the top covering when the soft top is
closed
Soft top ...................................................................................................................................................................................................... lock completely
Transition of seal at A-pillar and B-pillar .................................................................................................................................. check, correct, if required
Covering strip (arrow) ................................................................................................................................................... glue onto corner brace (version 1)
Soft top ........................................................................................................................................................................................................ unlock at front
Headliner ................................................................................................................................................................................................................... install
Trim and recessed handle .............................................................................................................................................................. install on soft top frame
Soft top motion ............................................................................................................................................................................ check, adjust, if required
Rain test .................................................................................................................................................................................................................. perform
Replacing Rear Top Covering
Replacing Rear Top Covering
Preceding work:
Hardtop removed.
NOTE:
Install top covering with MB special glue, part no. 000 989 92 71.
