SL 600 (129.076) V12-6.0L (120.983) (1997)
/v12-6.0l_(120.983)/Page-2644016.png)
Top covering ........................................................................................................................................................... glue onto ribbed surface on soft top bow
NOTE:
When gluing on ensure that the mark on the soft top brace and slit in the top covering coincide.
Covering strips .......................................................................................................................................................................... glue to inside of soft top bow
NOTE:
The seam on the top covering must be located in front of the edge on the soft top bow (figure at top right).
Screws (13, 12) on soft top bow ................................................................................................................................................................................ screw in
