SL 600 (129.076) V12-6.0L (120.983) (1997)
/v12-6.0l_(120.983)/Page-2648001.png)
Convertible Top Control Module: Procedures
Removing & Installing Soft Top Control Module
Removal
Ignition switched off
Disconnect and cover negative pole on battery (observe note)
Remove right occasional seat
Disconnect connectors on control module
Remove control module
Note:
It is necessary to disconnect the battery because the soft top control module is ative for approx. 60 minutes after the ignition has been
switched off.
Reinstall in opposite order
Check functions.
